Residential Locksmith Tampa

How to maintain your locks?

It is pretty easy to maintain your locks. With a good locking spray, you ensure that it is easy to unlock your door, and at the same time, you make sure that your locks last as long as possible.

Give your locks a long life

The Tampa weather is very changeable, and wind and weather can wear on your locks. We, therefore, recommend that you maintain your locks with lock spray – then you ensure the most extended life of your locks.

The more secure your lock is, the more complex it is inside as well. The small parts inside the lock should lubricate regularly.

When your locks have their 10th anniversary, we recommend that you consider whether your locks should be replaced. Ordinary wear on locks is inevitable. You should, therefore, always keep an eye on whether your locks work optimally so that you can have a safe and secure everyday life in your home.

If you doubt whether your locks should be replaced, you can always consult with an expert Locksmith Tampa or experienced sales consultants in your local DIY store.

How to lubricate your lock in 3 simple steps

You should lubricate your lock with lock spray before using the lock for the first time. It ensures that the function of the cylinder is always optimal.

We recommend that you lubricate your locks with lock spray at least once every six months to prevent damage to the cylinder.

How to use lock spray

Step 1:

Place the plastic can of the spray can in the keyhole and hold down the spray button for 1 second. You mustn’t spray anymore, as you can damage the lock if it becomes too greasy inside.

Step 2:

Insert the key in the lock and turn a few times.

Step 3:

Clean the key with a cloth to remove moisture from it.

How to use lock grease

Lock traps and the like are lubricated with lock grease. The locking catch is the sloping latch that goes in and out when you grab the handle.

The grease penetrates into the small irregularities of the steel so that the trap gets a smooth and hard surface. As a result, it ensures that the door closes more efficiently and more silently. In addition, the lock grease is moisturizing, reduces corrosion, and does not bind salt.

You can also use locking grease to lubricate hinges and the like.

Do your locks freeze during the winter?

You should pay special attention to exposed cylinders during the winter, as they can freeze. The best way to thaw your lock is by using a De-Icer spray.

We do not recommend putting hot water in the lock to thaw it, as it does more harm than good. The lock freezes again, and then you are just as far.

It can also be tempting to blow hot air into the keyhole to thaw the keyhole. This is not recommended as the hot air can form frost, which simply turns into new ice inside the lock.

Never use oil, graphite, or grease in the cylinder. Oil can cause the pins in the lock cylinder to stick so that they no longer fit the design of the key. The consequence may be that you can not open the door.

How to thaw frozen locks in 4 simple steps

If the lock is frozen, you can use isopropyl alcohol or De-Icer spray specially made to thaw frozen locks.

How to use De-Icer spray

Step 1:

Place the plastic can of the spray can in the keyhole and hold it for a few seconds. If the lock is still frozen, repeat the process.

Step 2:

Insert the key in the lock and turn a few times.

Step 3:

Remove the key and wipe it.

Step 4:

Once the lock is defrosted, spray the lock cylinder.

Keep your keys clean

You extend the life of the lock if you are careful to keep your keys clean, as otherwise, they can lead dirt into the cylinder and thus destroy it. Therefore, it would help if you cleaned the key from time to time.

Be aware that keys with electronics are not waterproof. Therefore, it would be best to clean electronic keys with a dry cloth.

Maintenance of padlocks

You maintain your padlock by spraying the keyhole with lock spray. In addition, the hole in which the bracket is inserted and the tip must be lubricated with locking grease.

Cleaning of handles and cylinder rings

Varnished or polished brass products

A damp cloth without soap is enough to wipe lacquered brass products. Next, you should polish polished brass with a sanding cream without abrasive.

For brass cylinders, put the key in the lock while polishing, preventing polishing cream from penetrating the cylinder.

Products with a surface of chrome or stainless steel

You can use a damp cloth (possibly with soap) to clean products with a surface of chrome, stainless steel, or stainless look.

If you need Locksmith in Tampa for installing locks or replacing locks.

Leave a Reply

Your email address will not be published. Required fields are marked *